|
for special designs make inquiry; this concerns: workpiece tolerance class / workpiece tolerance, gauge dimensions, dimensions, materials / coatings
德国莱尔麦斯螺纹规中国总代理
德国LEHRMESS莱尔麦斯量规、螺纹规
莱尔麦斯公司（LEHRMESS）创立于1938年，坐落在图林根林山，主要生产高精度测量仪器.，如螺纹规、极限规、锥度规、依据标准可以为ISO公制标准、DIN标准、美制标准等 地泰科盛 我们可以提供德国标准DIN螺纹规、英制惠氏螺纹规、管制螺纹规、美制螺纹规等各种标准螺纹规。等。其优势在于根据客户的需求为客户定制产品；经验丰富的员工，公司的高科技设备和高精度的产品都为客户产品的精度和质量提供了良好保障。
技术的不断发展和标准的不断完善要求测量仪器和设备一直保持高精度、高质量，所以在生产这些仪器的过程中，质量控制和质量保证要素。除了公司的光电设备外，LEHRMESS的员工经验和技术都能保证我们产品的高质量和高精度。此外，LEHRMESS还可提供定制产品的检验合格证书。
苏州斯托茨机电设备有限公司是一家，提供德国，瑞士，英国等数家在测量行业享有盛名的企业的检测产品及咨询服务，在线检测方案!
德国LMW量规、非标量规、精密零件等
Lehren- und Meßgerätewerk Schmalkalden GmbH
2.德国DIATEST孔径量仪：孔径测量,内径测量,塞规式测量,两瓣式测量,内径表式测量,锥孔/倒角测量,孔径量仪、塞规式测量系统（BMD）、小孔量规、量测台座、电子塞规、数显塞规、内径表式测量系统、内外齿测量系统、内外倒角、内外锥孔测量系统（AKT），外径测量系统、齿轮棒间距测量仪、校中心检具、曲轴检测仪（KP）等。
3.德国KORDT蔻特: 螺纹测量,螺纹检测,内螺纹中径测量,外螺中径纹测量,螺纹测试机,螺纹规,螺纹深度测量,螺纹跳动测量,内外螺纹检测仪、螺纹跳动仪、深度测量仪等。
4. 德国Kroeplin克莱普林: 带表卡规,电子卡规,内径卡规,外径卡规管壁卡规测厚卡规瓶口测量,卡规全系列 内、外测量卡规。
5.瑞士PETER HIRT皮特: 线性位移电感传感器、高数度位移传感器。
6． 德国KAEFER凯发：各类百分表、千分表、杠杆表、精密千分表、杠杆仪、厚度仪。
7.德国FEINMESS-SUHL苏尔: 精密千分尺、检测设备，各种通用量仪，实验室量仪：检表仪、量块比较仪等。
8.英国WESTERN PEGASUS西部飞马:齿轮、花键测量仪、花键环规、塞规、花键规定制,校对齿规。
9.德国LEHRMESS莱尔麦斯:各种标准规、螺纹规、校对规、高品质螺纹塞规、环规
10.德国IBR电子柱
11．德国STOTZ气动量仪
12.德国FRENCO弗兰科:齿轮、花键测量仪。
DIN40430德国螺纹标准
DIN 103-7-1972 ISO 米制梯形螺纹
德国PG制螺纹标准与技术数据
德国标准螺纹环规 DIN 2999
EN 10226-2-2002
ISO 228
(内螺纹) 法国 G(外螺纹)、R(外螺纹) 德国 R(外螺纹) 日本 PT、R ISO R(外螺纹)、Rc(内螺纹) 4、60°圆锥管螺纹的转化 60°圆锥管螺纹是指牙型角为 60°、螺纹锥度为 1:16
苏州斯托茨机电设备有限公司专业代理德国进口螺纹规、德国DIN量规，德国JBO螺纹规、德国LMW莱尔麦斯量规、意大利Marposs MG量规。同时代理：美国Cameron球规、Mueller Gage航空量仪、Sun-tec硬度计、Universal环球同心度仪、 PMC Lone Star石油螺纹规、PMC Mercury量规、Hemco Gage紧固件螺纹规、Vermont Gage针规、VTG螺纹规、美国GSG非标螺纹规、Threadcheck航空螺纹规、 Westport医疗螺纹规、英国Threadmaster惠氏螺纹规、Tru-thread石油螺纹规、美国Gagemaker单项仪，瑞士TESA测高仪、德国Mahr马尔粗糙度仪、数显深度尺、东精精密圆度仪、Marposs气动量仪、Trimos测高仪、海克斯康三坐标、影像仪、英国Zodiac gauge、英国Original Gauge螺纹规等。
|
DIN
13-23 |
ISO general purpose metric screw threads - Part 23:
Limits of sizes for fine pitch threads with the preferred tolerance classes;
Nominal diameter from 53 mm to 110 mm |
Active |
||
|
DIN
13-24 |
ISO general purpose metric screw threads - Part 24:
Limits of sizes for fine pitch threads with the preferred tolerance classes;
Nominal diameter from 112 mm to 180 mm |
Active |
||
|
DIN
13-25 |
ISO general purpose metric screw threads - Part 25:
Limits of sizes for fine pitch threads with the preferred tolerance classes;
Nominal diameter from 182 mm to 250 mm |
Active |
||
|
DIN
13-26 |
ISO general purpose metric screw threads - Part 26:
Limits of sizes for fine pitch threads with the preferred tolerance classes;
Nominal diameter from 252 mm to 1000 mm |
Active |
||
|
DIN
13-28 |
ISO general purpose metric screw threads - Part 28:
Coarse and Fine Screw Threads from 1 to 250 mm Screw Thread Diameter;
Root Cross-sections, Tensile Stress Cross-sections and Pitch Angles |
Active |
||
|
DIN
13-50 |
ISO general purpose metric screw threads - Part 50:
Combination of tolerance classes for formed internal screw threads |
Active |
||
|
DIN
13-51 |
ISO general purpose metric screw threads - Part 51:
External screw threads for transition fits (former: screw threads for
interference fit); tolerances, limit deviations, limits of sizes |
Active |
||
|
DIN
13-52 |
ISO general purpose metric screw threads - Part 52:
Multi-start thread tolerances and deviation of profile |
Active |
||
|
DIN 15-2 |
Technical drawings; lines; general application |
Withdrawn |
DIN ISO 128-24 |
|
|
DIN
16 |
Oblique Standard Typeface for Drawings |
Withdrawn |
||
|
DIN
17 |
Upright Standard Typeface for Drawings |
Withdrawn |
||
|
DIN 38 |
Plain bearings; bearing metal lining for thick-walled
multilayer plain bearings |
Active |
||
|
DIN 74 |
Countersinks for countersunk head screws (except screws
with DIN EN 27721 head) |
Active |
||
|
DIN
76-1 |
Thread run-outs and thread undercuts for ISO metric threads in accordance with DIN 13-1 |
Active |
||
|
DIN
76-2 |
Thread run-outs and thread undercuts for pipe threads
conforming to ISO 228 part 1 |
Active |
||
|
DIN
76-3 |
Runouts, Undercuts for Trapezoidal Threads, Buttress
Threads and Knuckle Threads and other Threads of Coarse Pitch |
Active |
||
|
DIN
78 |
Protrusions of bolt ends |
Active |
DIN
EN ISO 4753 (governs thread
ends for bolts assembled with hexagon slotted nuts) |
ISO
4753 |
|
DIN
84 |
Product grade A slotted cheese head screws |
Withdrawn |
DIN
EN ISO 1207 |
ISO
1207 |
|
DIN
85 |
Product grade A slotted pan head screws |
Withdrawn |
DIN
EN ISO 1580 |
ISO
1580 |
|
DIN
88 |
Product slotted oval head countersunk machine screws |
Withdrawn |
ISO
2010-1983[1] |
|
|
DIN
93 |
Tab washers with long tab |
Withdrawn |
||
|
DIN
94 |
Split pins |
Withdrawn |
DIN
EN ISO 1234 |
ISO
1234 |
|
DIN
95 |
Slotted Raised Countersunk (Oval) Head Wood Screws |
Active |
||
|
DIN
96 |
Slotted Round Head Wood Screws |
Active |
DIN 100 to DIN 199
|
DIN |
Title |
Status |
DIN replacement |
Other org |
|
DIN 101 |
Rivets - Technical specifications |
Active |
||
|
DIN
103-1 |
ISO Metric Trapezoidal Screw Thread; Profiles |
Active |